Wear Resistant Healthcare High Hardness Recycling Excellent Performance PBT

Our product is composed of 15% stainless steel fiber mixed with ABS material, resulting in a highly conductive and shielding product with excellent performance in terms of flame retardancy.

The presence of stainless steel fiber enhances the conductivity of the product, making it suitable for applications where electrical conductivity is required. The shielding capabilities of the product help to protect against electromagnetic interference (EMI) and radio frequency interference (RFI).

In addition to its conductive and shielding properties, our product also exhibits excellent wear resistance, making it ideal for use in healthcare settings where durability is essential. The high hardness of the material ensures that it can withstand repetitive use and maintain its structural integrity.

Furthermore, our product is designed with recyclability in mind, making it a sustainable choice for various applications. The recycling properties of the material allow for a reduced environmental impact and support the circular economy.

Overall, our PBT-based product offers a combination of conductivity, shielding, wear resistance, and recyclability that makes it suitable for a wide range of applications in industries such as electronics, healthcare, and manufacturing.

General

Form                                        Resin Pellets

Filler                                          proprietary lubricants

Feature                                    Abrasion Resistant            Internally Lubricated

Uses                                          Healthcare                        Packaging

Physical                                                                                Nominal Value                                       Test Method

Density / Specific Gravity

1.4 g/cm³                                               ASTM D792

1.4 g/cm³                                             ISO 1183

Moisture Absorption(23 °C;50% RH/24 hrs)                      0.07 %                                                    ASTM D570

Mold Shrinkage, Flow(24 hrs)                                              2.6 - 2.8 %                                             ASTM D955

Mold Shrinkage, XFlow(24 hrs)                                           2.5 - 2.7 %                                              ASTM D955

Melt Flow Rate[MFR](250 °C;5 kgf)                                     62 g/10min                                             ASTM D1238

Wear Factor Washer                                                           5 10^-10 in^5-min/ft-lb-hr                  ASTM D3702

Dynamic Cof                                                                       0.33                                                         ASTM D3702

Static Cof                                                                             0.24                                                        ASTM D3702

Izod Impact, Unnotched

23 °C

550 J/m

ASTM D4812

80*10*4;23 °C

44 kJ/m²

ISO 180/1U

Izod Impact, Notched

23 °C

30 J/m

ASTM D256

80*10*4;23 °C

4 kJ/m²

ISO 180/1A

Tensile Stress, Yield

5 mm/min;Type I

43 MPa

ASTM D638

5 mm/min

45 MPa

ISO 527

Tensile Stress, Break

5 mm/min;Type I

43 MPa

ASTM D638

5 mm/min

45 MPa

ISO 527

Tensile Strain, Yield

5 mm/min;Type I

11 %

ASTM D638

5 mm/min

17.8 %

ISO 527

Tensile Strain, Break

5 mm/min;Type I

14 %

ASTM D638

5 mm/min

18.9 %

ISO 527

Tensile Modulus

50 mm/min

2550 MPa

ASTM D638

1 mm/min

2680 MPa

ISO 527

Flexural Stress, Yield

1.3 mm/min;50 mm;span

74 MPa

ASTM D790

2 mm/min

74 MPa

ISO 178

Flexural Modulus

1.3 mm/min;50 mm;span

2300 MPa

ASTM D790

2 mm/min

2400 MPa

ISO 178

Thermal

Nominal Value

Test Method

Heat Deflection Temperature[HDT], Unannealed(3.2 mm;1.82 MPa)

55 °C

ASTM D648

Drying Temperature<Injection>

120 °C

Drying Time<Injection>

4 hrs

Maximum Moisture Content<Injection>

0.05 %

Melt Temperature<Injection>

240 - 265 °C

Front, Zone 3 Temperature<Injection>

260 - 270 °C

Middle, Zone 2 Temperature<Injection>

245 - 255 °C

Rear, Zone 1 Temperature<Injection>

220 - 230 °C

Mold Temperature<Injection>

80 - 100 °C

Back Pressure<Injection>

0.2 - 0.3 MPa

Screw Speed <Injection>

30 - 60 rpm