- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Search
 |
| Quantity: | |
|---|---|
PX13012-XH
FOREVER
1 Why choose thermal conductive plastics instead of alloy?
Because the limitation of design freedom from aluminum and complicated second process,thermal conductive plastics can be mass-production with much lower cost.
Product Description | |||||
PX13012-XH compound is the good proposal for the thermal conductivity requirements. Made from Nylon 6 resin, this compound is engineered to perfection to deliver superior performance and reliability. The key highlight of this grade is its proprietary thermal filler that ensures efficient heat transfer and distribution for effective thermal management.
Additionally, PX13012-XH compound comes equipped with a range of added features such as electrically insulative and non-brominated, non-chlorinated flame retardant properties, making it the ultimate choice for a wide range of applications.
The Thermally Conductive feature of this compound ensures efficient heat transfer, while the Electrically Insulative property makes it ideal for electrical applications that require non-conductive materials. The non-brominated, non-chlorinated flame retardant feature provides extra safety while using this compound.
Overall, if you are looking for a high-quality, reliable, and efficient thermal conductivity solution, PX13012-XH compound is the perfect choice for you! | |||||
General | |||||
Form |
| ||||
Feature
| Non-Brominated & Non- Chlorinated Flame Retardant | Non-Chlorinated Electrically Isolative | |||
|
| ||||
Physical | Nominal Value | Test Method | |||
Molding Shrinkage, Flow, Tensile Bar | 0.7 % | SABIC Method | |||
Mold Shrinkage, Flow 24 hrs 24 hrs |
0.55 % 0.55 % |
ASTM D955 ISO 294 | |||
Mold Shrinkage, XFlow 24 hrs 24 hrs |
0.65 % 0.65 % |
ASTM D955 ISO 294 | |||
Density / Specific Gravity | 1.68 g/cm³ | ISO 1183 | |||
Water Absorption(24 hrs;23 °C) | 0.23 % | ISO 62-1 | |||
Mechanical | Nominal Value | Test Method |
Izod Impact, Unnotched 23 °C 80*10*4;23 °C |
152 J/m 9 kJ/m² |
ASTM D4812 ISO 180/1U |
Izod Impact, Notched 23 °C 80*10*4;23 °C |
15 J/m 3 kJ/m² |
ASTM D256 ISO 180/1A |
Tensile Stress, Yield(5 mm/min;Type I) | 68 MPa | ASTM D638 |
Tensile Strain, Break 5 mm/min;Type I 5 mm/min |
1.2 % 1.1 % |
ASTM D638 ISO 527 |
Tensile Modulus 5 mm/min 1 mm/min |
1.0E+04 MPa 1.3E+04 MPa |
ASTM D638 ISO 527 |
Flexural Stress, break(1.3 mm/min;50 mm;span) | 119 MPa | ASTM D790 |
Flexural Modulus 1.3 mm/min;50 mm;span 2 mm/min |
1.2E+04 MPa 1.2E+04 MPa |
ASTM D790 ISO 178 |
Tensile Stress, Break(5 mm/min) | 75 MPa | ISO 527 |
Flexural Stress, Yield(2 mm/min) | 105 MPa | ISO 178 |
Thermal | Nominal Value | Test Method |
UL Recognized(≥ 0.8 mm) | V-0 | UL 94 |
Glow Wire Ignition Temperature [GWIT] 0.8 mm 1.6 mm 3 mm |
750 °C 775 °C 800 °C | IEC 60695-2-13 |
Glow Wire Flammability Index 0.8 mm 1.6 mm 3 mm |
960 °C 960 °C 960 °C | IEC 60695-2-12 |
Heat Deflection Temperature[HDT](0.45 MPa;3.2 mm) | 203 °C | ASTM D648 |
Heat Deflection Temperature[HDT], Unannealed(3.2 mm;1 82 MPa) | 137 °C | ASTM D648 |
CTE, Flow -40 - 40 °C -30°C to 80°C |
3.3E-05 1/°C 3.9E-05 1/°C |
ASTM E831 ISO 11359-2 |
CTE, XFlow -40 - 40 °C -30°C to 80°C |
4.4E-05 1/°C 5.5e-05 1/°C |
ASTM E831 ISO 11359-2 |
Thermal conductivity through plane(60*60*3mm plaque) | 1.2 W/m-K | ISO 22007-2 |
Thermal conductivity in plane(60*60*3mm plaque) | 5.5 W/m-K | ISO 22007-2 |
Ball Pressure Test(165°C +/- 2°C) | PASSES | IEC 60695-10-2 |
HDT/Bf(0.45) | 203 °C | ISO 75/Bf |
HDT/Af(1.8) | 160 °C | ISO 75/Af |
Relative Temp Index, Elec | 130 °C | UL 746B |
Relative Temp Index, Mechanical with Impact | 100 °C | UL 746B |
Relative Temp Index, Mechanical without Impact | 130 °C | UL 746B |
Electrical | Nominal Value | Test Method |
Surface Resistivity | 4.0E+14 ohms | ASTM D257 |
Dielectric Strength, in Oil(1.6 mm) | 7.2 kV/mm | ASTM D149 |
Dielectric Strength(1.6 mm) | 6.1 kV/mm | IEC 60243-1 |
Comparative Tracking Index, CTI | PLC 0 | UL 746A |
Comparative Tracking Index | 600 V | IEC 60112 |
Hot-wire Ignition, HWI(≥ 0.8 mm) | PLC 0 | UL 746A |
High Amp Arc Ignition, HAI(≥ 0.8 mm) | PLC 0 | UL 746A |
Processing | Nominal Value | |
Drying Temperature<Injection> | 80 °C | |
Drying Time<Injection> | 4 hrs | |
Maximum Moisture Content<Injection> | 0.25 % | |
Minimum Moisture Content<Injection> | 0.15 % | |
Melt Temperature<Injection> | 270 - 295 °C | |
Front, Zone 3 Temperature<Injection> | 270 - 290 °C | |
Middle, Zone 2 Temperature<Injection> | 270 - 290 °C | |
Rear, Zone 1 Temperature<Injection> | 260 - 275 °C | |
Mold Temperature<Injection> | 85 - 100 °C | |
Back Pressure<Injection> | 0.2 - 0.3 MPa | |
Screw Speed<Injection> | 20 - 60 rpm |
1 Why choose thermal conductive plastics instead of alloy?
Because the limitation of design freedom from aluminum and complicated second process,thermal conductive plastics can be mass-production with much lower cost.
Product Description | |||||
PX13012-XH compound is the good proposal for the thermal conductivity requirements. Made from Nylon 6 resin, this compound is engineered to perfection to deliver superior performance and reliability. The key highlight of this grade is its proprietary thermal filler that ensures efficient heat transfer and distribution for effective thermal management.
Additionally, PX13012-XH compound comes equipped with a range of added features such as electrically insulative and non-brominated, non-chlorinated flame retardant properties, making it the ultimate choice for a wide range of applications.
The Thermally Conductive feature of this compound ensures efficient heat transfer, while the Electrically Insulative property makes it ideal for electrical applications that require non-conductive materials. The non-brominated, non-chlorinated flame retardant feature provides extra safety while using this compound.
Overall, if you are looking for a high-quality, reliable, and efficient thermal conductivity solution, PX13012-XH compound is the perfect choice for you! | |||||
General | |||||
Form |
| ||||
Feature
| Non-Brominated & Non- Chlorinated Flame Retardant | Non-Chlorinated Electrically Isolative | |||
|
| ||||
Physical | Nominal Value | Test Method | |||
Molding Shrinkage, Flow, Tensile Bar | 0.7 % | SABIC Method | |||
Mold Shrinkage, Flow 24 hrs 24 hrs |
0.55 % 0.55 % |
ASTM D955 ISO 294 | |||
Mold Shrinkage, XFlow 24 hrs 24 hrs |
0.65 % 0.65 % |
ASTM D955 ISO 294 | |||
Density / Specific Gravity | 1.68 g/cm³ | ISO 1183 | |||
Water Absorption(24 hrs;23 °C) | 0.23 % | ISO 62-1 | |||
Mechanical | Nominal Value | Test Method |
Izod Impact, Unnotched 23 °C 80*10*4;23 °C |
152 J/m 9 kJ/m² |
ASTM D4812 ISO 180/1U |
Izod Impact, Notched 23 °C 80*10*4;23 °C |
15 J/m 3 kJ/m² |
ASTM D256 ISO 180/1A |
Tensile Stress, Yield(5 mm/min;Type I) | 68 MPa | ASTM D638 |
Tensile Strain, Break 5 mm/min;Type I 5 mm/min |
1.2 % 1.1 % |
ASTM D638 ISO 527 |
Tensile Modulus 5 mm/min 1 mm/min |
1.0E+04 MPa 1.3E+04 MPa |
ASTM D638 ISO 527 |
Flexural Stress, break(1.3 mm/min;50 mm;span) | 119 MPa | ASTM D790 |
Flexural Modulus 1.3 mm/min;50 mm;span 2 mm/min |
1.2E+04 MPa 1.2E+04 MPa |
ASTM D790 ISO 178 |
Tensile Stress, Break(5 mm/min) | 75 MPa | ISO 527 |
Flexural Stress, Yield(2 mm/min) | 105 MPa | ISO 178 |
Thermal | Nominal Value | Test Method |
UL Recognized(≥ 0.8 mm) | V-0 | UL 94 |
Glow Wire Ignition Temperature [GWIT] 0.8 mm 1.6 mm 3 mm |
750 °C 775 °C 800 °C | IEC 60695-2-13 |
Glow Wire Flammability Index 0.8 mm 1.6 mm 3 mm |
960 °C 960 °C 960 °C | IEC 60695-2-12 |
Heat Deflection Temperature[HDT](0.45 MPa;3.2 mm) | 203 °C | ASTM D648 |
Heat Deflection Temperature[HDT], Unannealed(3.2 mm;1 82 MPa) | 137 °C | ASTM D648 |
CTE, Flow -40 - 40 °C -30°C to 80°C |
3.3E-05 1/°C 3.9E-05 1/°C |
ASTM E831 ISO 11359-2 |
CTE, XFlow -40 - 40 °C -30°C to 80°C |
4.4E-05 1/°C 5.5e-05 1/°C |
ASTM E831 ISO 11359-2 |
Thermal conductivity through plane(60*60*3mm plaque) | 1.2 W/m-K | ISO 22007-2 |
Thermal conductivity in plane(60*60*3mm plaque) | 5.5 W/m-K | ISO 22007-2 |
Ball Pressure Test(165°C +/- 2°C) | PASSES | IEC 60695-10-2 |
HDT/Bf(0.45) | 203 °C | ISO 75/Bf |
HDT/Af(1.8) | 160 °C | ISO 75/Af |
Relative Temp Index, Elec | 130 °C | UL 746B |
Relative Temp Index, Mechanical with Impact | 100 °C | UL 746B |
Relative Temp Index, Mechanical without Impact | 130 °C | UL 746B |
Electrical | Nominal Value | Test Method |
Surface Resistivity | 4.0E+14 ohms | ASTM D257 |
Dielectric Strength, in Oil(1.6 mm) | 7.2 kV/mm | ASTM D149 |
Dielectric Strength(1.6 mm) | 6.1 kV/mm | IEC 60243-1 |
Comparative Tracking Index, CTI | PLC 0 | UL 746A |
Comparative Tracking Index | 600 V | IEC 60112 |
Hot-wire Ignition, HWI(≥ 0.8 mm) | PLC 0 | UL 746A |
High Amp Arc Ignition, HAI(≥ 0.8 mm) | PLC 0 | UL 746A |
Processing | Nominal Value | |
Drying Temperature<Injection> | 80 °C | |
Drying Time<Injection> | 4 hrs | |
Maximum Moisture Content<Injection> | 0.25 % | |
Minimum Moisture Content<Injection> | 0.15 % | |
Melt Temperature<Injection> | 270 - 295 °C | |
Front, Zone 3 Temperature<Injection> | 270 - 290 °C | |
Middle, Zone 2 Temperature<Injection> | 270 - 290 °C | |
Rear, Zone 1 Temperature<Injection> | 260 - 275 °C | |
Mold Temperature<Injection> | 85 - 100 °C | |
Back Pressure<Injection> | 0.2 - 0.3 MPa | |
Screw Speed<Injection> | 20 - 60 rpm |
