Availability: | |
---|---|
Quantity: | |
PP-GF30-02 AD 3002-XH
Forever
PP-GF30-02 AD 3002 it has lower thermal distortion temperature, low transparency, low glossiness, and low rigidity, but has stronger impact strength. Due to its high crystallinity, this material has excellent surface stiffness and scratch resistance.
General |
Form |
Filler |
Physical Nominal Value Test Method |
Density / Specific Gravity 1.12 g/cm³ ISO 1183 |
Mechanical Nominal Value Test Method |
Tensile Modulus 5800 MPa ISO 527-2/1A |
Tensile Stress, Break 92.0 MPa ISO 527-2/1A/5 |
Tensile Strain, Break 2.5 % ISO 527-2/1A/5 |
Flexural Modulus(23 °C) 6000 MPa ISO 178 |
Flexural Stress(23 °C) 155 MPa ISO 178 |
C harpy Notched Impact Strength(23 °C) 20 kJ/m² ISO 179 1eA |
Thermal Nominal Value Test Method |
Heat Deflection Temperature, Unannealed(1.8 MPa) 157 °C ISO 75-2/A |
Flame Rating(1 mm) HB UL 94 |
Processing Nominal Value |
Drying Temperature<Injection> 90 - 100 °C |
Drying Time<Injection> 2.0 hr |
Suggested Max Moisture<Injection> 0.20 % |
Rear Temperature<Injection> 200 - 210 °C |
Middle Temperature<injection> 210 - 220 °C |
Front Temperature<Injection> 220 - 230 °C |
Nozzle Temperature<Injection> 230 - 240 °C |
Processing Temp, Melt<Injection> 230 - 240 °C |
Mold Temperature<Injection> 40 - 70 °C |
Feeding Zone Temperature<Injection> 20 - 50 °C |
Zone4 temperature<Injection> 230 - 240 °C |
PP-GF30-02 AD 3002 it has lower thermal distortion temperature, low transparency, low glossiness, and low rigidity, but has stronger impact strength. Due to its high crystallinity, this material has excellent surface stiffness and scratch resistance.
General |
Form |
Filler |
Physical Nominal Value Test Method |
Density / Specific Gravity 1.12 g/cm³ ISO 1183 |
Mechanical Nominal Value Test Method |
Tensile Modulus 5800 MPa ISO 527-2/1A |
Tensile Stress, Break 92.0 MPa ISO 527-2/1A/5 |
Tensile Strain, Break 2.5 % ISO 527-2/1A/5 |
Flexural Modulus(23 °C) 6000 MPa ISO 178 |
Flexural Stress(23 °C) 155 MPa ISO 178 |
C harpy Notched Impact Strength(23 °C) 20 kJ/m² ISO 179 1eA |
Thermal Nominal Value Test Method |
Heat Deflection Temperature, Unannealed(1.8 MPa) 157 °C ISO 75-2/A |
Flame Rating(1 mm) HB UL 94 |
Processing Nominal Value |
Drying Temperature<Injection> 90 - 100 °C |
Drying Time<Injection> 2.0 hr |
Suggested Max Moisture<Injection> 0.20 % |
Rear Temperature<Injection> 200 - 210 °C |
Middle Temperature<injection> 210 - 220 °C |
Front Temperature<Injection> 220 - 230 °C |
Nozzle Temperature<Injection> 230 - 240 °C |
Processing Temp, Melt<Injection> 230 - 240 °C |
Mold Temperature<Injection> 40 - 70 °C |
Feeding Zone Temperature<Injection> 20 - 50 °C |
Zone4 temperature<Injection> 230 - 240 °C |