Availability: | |
---|---|
Quantity: | |
PP-1804-XH
Forever
PP-1804 is a polypropylene compound with conductive properties and a medium melt flow rate.
General | |
Form | |
Filler | |
Feature | |
Usage | |
Physical Nominal Value Test Method | |
Density / Specific Gravity 1.03 g/cm³ ASTM D792 | |
Molding Shrinkage, Flow(3.2 mm) 1.2 - 1.4 % ASTM D955 | |
Mechanical Nominal Value Test Method | |
Tensile Strength 25.0 MPa ASTM D638 | |
Tensile Elongation, Break 4.0 % ASTM D638 | |
Flexural Modulus 1230 MPa ASTM D790 | |
Flexural Strength 41.0 MPa ASTM D790 | |
Notched Izod Impact(23 °C) 130 J/m ASTM D256 | |
Thermal Nominal Value Test Method | |
Deflection Temperature Under Load, Unannealed(1.8 MPa;4 mm) | 65.0 °C ASTM D648 |
Electrical Nominal Value Test Method | |
Surface Resistivity 1.0E+3 - 1.0E+5 ohms ASTM D257 | |
Processing Nominal Value | |
Drying Temperature<Injection> 80 °C | |
Drying Time<Injection> 2.0 - 4.0 hr | |
Rear Temperature<Injection> 185 - 190 °C | |
Middle Temperature<injection> 190 - 195 °C | |
Front Temperature<Injection> 195 - 210 °C | |
Nozzle Temperature<Injection> 210 - 220 °C | |
Processing Temp, Melt<Injection> 190 - 220 °C | |
Mold Temperature<Injection> 60 - 90 °C |
PP-1804 is a polypropylene compound with conductive properties and a medium melt flow rate.
General | |
Form | |
Filler | |
Feature | |
Usage | |
Physical Nominal Value Test Method | |
Density / Specific Gravity 1.03 g/cm³ ASTM D792 | |
Molding Shrinkage, Flow(3.2 mm) 1.2 - 1.4 % ASTM D955 | |
Mechanical Nominal Value Test Method | |
Tensile Strength 25.0 MPa ASTM D638 | |
Tensile Elongation, Break 4.0 % ASTM D638 | |
Flexural Modulus 1230 MPa ASTM D790 | |
Flexural Strength 41.0 MPa ASTM D790 | |
Notched Izod Impact(23 °C) 130 J/m ASTM D256 | |
Thermal Nominal Value Test Method | |
Deflection Temperature Under Load, Unannealed(1.8 MPa;4 mm) | 65.0 °C ASTM D648 |
Electrical Nominal Value Test Method | |
Surface Resistivity 1.0E+3 - 1.0E+5 ohms ASTM D257 | |
Processing Nominal Value | |
Drying Temperature<Injection> 80 °C | |
Drying Time<Injection> 2.0 - 4.0 hr | |
Rear Temperature<Injection> 185 - 190 °C | |
Middle Temperature<injection> 190 - 195 °C | |
Front Temperature<Injection> 195 - 210 °C | |
Nozzle Temperature<Injection> 210 - 220 °C | |
Processing Temp, Melt<Injection> 190 - 220 °C | |
Mold Temperature<Injection> 60 - 90 °C |